![]() main libvlc: Running vlc with the default interface. VLC media player 2.1.4 Rincewind (revision 2.1.4-0-g2a072be) Is there anything noticably wrong with this? Here is the error output in terminal: Setup channel1 input channel1 output #duplicate The streams work when I view them individually, but not together, which of course is the end goal. So far I've been unsuccessful in getting this to work. Unfortunately, I'm either an idiot or VLC's documentation is just really poor (or both?). but if i open vlc on a second machine and try to get it, the first one gets kicked out. I saw some references indicating that the mosaic feature is what I want. I can see the camera stream in vlc through accessing: rtsp://RPI-IP:8888/live.sdp. I will not be recording or doing anything like that. UDP stream is coming on eth1 and I can see that is here with TCPDUMP on that interface. Default route is on eth0, and multicast route is on eth1. One is just for internet and the other one is on local subnet where multicast UDP stream is coming. I have Ubuntu desktop 14.04 with two NIC, eth0 and eth1. In particular, this would be using RTSP streams from my surveillance cameras to watch a live stream. VLC cant open UDP stream in Ubuntu 14.04. I'd like to set up VLC to launch two videos side by side in one window. In this example I used channels 881 through 888, and configured myth to listen on 192.168.0.Hi there. Make sure I got proper program guide data. Of the mythtv specific EXTMYTHTV tag to specify the XMLTVID for each station since I wanted to ![]() Here is the M3U file I defined for each of the channels I wanted to use. When I activate the second stream in the GUI, the first one is stopped. # These are the lines from my nf I used to get the program ID (last column) and Frequency (3rd column) Setup QAM2IPTV option dvb-frequency=681000000 I'll leave that as a project for you to figure out. The Frequency information and program ID's can either be gathered from the mythtv database if you have previously scanned the channels or from a nf. The program ID's of each channel I wanted to be made available,Īnd finally I defined what I wanted to be done with each stream.(repackaged as MPEG2TS and streamed to a specific IP/PORT), I defined the adapter I wanted to use (dvb1 in my case), Getting Started First I defined my VLC config file. Unfortunately in my case the vlc package for Slackware didn't include DVB support so I had to compile my own. On my backend (XP2500+) vlc used about 13% cpu in this role and the backend used almost none.įor this to work your version of VLC must be compiled with -enable-dvb and the linux dvb headers installed. I don't see any reason this wouldn't work with earlier revisions, Slave backend I'm recording this on, but there is no reason this wouldn't work across hosts over a network as well.įor this I used VLC 0.8.6b and MythTV svn head revision. What Im trying to achieve is to display 3 ip cameras on VLC at the same time. In my case the DVB source is in the same machine as the IPTV streams which I then configure mythtv's IPTV recorder to record. While I know that work is ongoing enabling this type of recording directly in mythtv but one night I had a thought on how I might do it using VLC and decided to try it out with happy results.īasically I setup VLC to access the DVB card, reading in the entire multiplex and breaking it out into 8 seperate This allowed me to record 8 separate channels from the single card and lucky for me 7 of 8 are my main recording channels. YMMV but overall this works very well for me in the few days I've been using it. This page is to document how I setup MythTV and VLC to record multiple channels from a single multiplex on a single DVB card. 4.2 Define our IPTV channels list for MythTV.4.1 First I defined my VLC config file.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |